Wilesco D202 steam engine heated by electricity
€701.50
Delivery ca. 8 weeks
20
Product information "Wilesco D202 steam engine heated by electricity"
Wilesco D202 steam engine heated by electricity
This stationary steam engine is the most produced machine in the Wilesco range. The 6.5 x 16.5 cm boiler has a volume of 500 cc. The steam pressure is constantly monitored via the manometer, and the drain cock allows for any remaining water to be removed from the boiler after operation.
Our D20 is a model steam engine with plenty of power, making it ideal for operating larger model systems. Suitable drive models are available in a wide selection in our shop. Its real steam chimney also provides great fun, as the steam output can be regulated via the steam valve.
Like all Wilesco steam engine models, the D20 is "Made in Germany" and runs reliably for many years, with sufficient oiling and attention to the boiler level.
Further details on the Wilesco steam engine model D202:
- Flywheel can be started in both directions, with a diameter of 10 cm
- Spring safety valve
- Steam whistle with chain pull
- Steam shut-off hand valve, centrifugal regulator, and steam jet lubricator
- Double-acting cylinder system with a diameter of 13 mm and a stroke of 16 mm
- Base size: 29 x 35 cm
- Height: 32 cm
- Net weight: 2.3 kg
- Gift packaging: 36 x 30 x 20 cm
- Boiler volume: 500 cc
- Heating D202: Electricity
Login
Accessories
Wilesco Steam Engine Oil - Perfectly Matched for Your Wilesco Steam Engine Everyone who loves steam engines knows that a steam engine cannot run without steam engine oil. Regular and sufficient oiling with our original Wilesco steam engine oil ensures a smooth operation of your power engine and a long lifespan of the product you have purchased. The oil is used for lubricating pistons and cylinders as well as all other bearings. It is important not to use just any oil, because the correct consistency of the oil is crucial. Depending on the type of oil used, the oil may become hard, too thick or too thin. Therefore, Wilesco offers its special steam engine oil, whose composition is perfectly matched to all Wilesco steam engines. With our steam engine oil, you can be sure you are making the right choice!
Wilesco Drive Belts in a Bag These drive belts are required to operate our drive models. One bag contains five drive spirals. The spirals are made of spring wire and can be closed into a belt by twisting them together. The drive belts come in widths of 2 mm and 2.5 mm. The shorter drive spirals are 26 cm long. However, drive spirals 50 cm long are more suitable for simultaneous operation of several Wilesco models, allowing for a more flexible setup.
The drive belts transmit the power of the steam engines to the drive models. 5 drive belts in one bag.
The drive belts transmit the power of the steam engines to the drive models. 5 drive belts in one bag.
The drive belts transmit the power of the steam engines to the drive models. 5 drive belts in one bag.
Spare Parts
D20 Complete Power Unit (from 2003) – Genuine WILESCO Spare Part with Exhaust to Chimney This complete power unit for the WILESCO D20 (model year from 2003) comes with the steam exhaust pipe leading to the chimney. It is the perfect replacement to restore your steam engine to its original condition or to fully replace a damaged unit. Fits WILESCO D20 (built from 2003 onwards) Includes exhaust pipe to chimney – authentic operation effect Pre-assembled unit – easy to install Genuine part – Made in Germany Scope of Delivery Complete D20 power unit (from 2003) supplied as a pre-assembled unit with exhaust pipe to chimney (delivered as shown in the product image). Notes Compatible only with D20 models from model year 2003 onwards. Please check model designation and year before ordering.
Ölerschraube, vernickelt M6 für die Dampfmaschinen D16, D161, D18, D20, D24, D48, D52.
Ersatz-Dampfstrahlöler mit Rohr/Schraube für die Dampfmaschine D20.
Spring‑Loaded Safety Valve M6 x 0.75 Fine Thread (from 1990), Nickel‑Plated High‑quality nickel‑plated safety valve for WILESCO steam engines. Provides reliable overpressure protection with a durable spring mechanism. Suitable for all WILESCO boilers from 1990 onwards with M6 x 0.75 fine thread. Thread: M6 x 0.75 (fine thread) Finish: nickel‑plated for corrosion resistance Compatibility: all boilers from 1990+ with M6 x 0.75 Note for older machines: For units built before 1990 there is no compatible safety valve – a new boiler must be installed. Genuine WILESCO spare part – Made in Germany
Nickel steam whistle with chain pull and M6 thread for the steam engines D12 (up to year of construction 2014), D16, D161, D18, D20, D22, D24, T90. Note: When using the steam whistles with chain pull, a spring safety valve must be installed on the boiler.
Gasket Assortment M3-M6: This assortment includes a variety of high-quality gaskets in various sizes from M3 to M6, suitable for all Wilesco steam engines. These gaskets provide reliable sealing for a wide range of applications and threads. They are ideal for use in steam engines, mechanical devices, and other industrial applications to prevent leakage of steam and oil. With a wide selection of sizes, you are equipped for various project requirements.
Manometer mit Anschluss unten M6, Ø 35 m, inkl. Adapterstück Nr. 01529 (innen M6 - außen M5) für D18, D20, D22, D141, D320, D430, T125.
Wasserstandsglas mit 4 mm Stärke und Durchmesser 37 mm, mit Schrauben, Muttern und Dichtungen (Fertigung ab 1976) für die Dampfmaschinen: D12 (bis 2014) D14 D141 D15 D16 D161 D18 D20 D22 D24 D48 T90
Ersatz-Metallring für das Wasserstandsglas aus Nickel Ø 37 mm für die Dampfmaschinen D12 (bis 2014), D14, D141, D16, D161, D18, D20, D24, D48.
Dampfabsperrventil/Ablassventil ohne Ventilkörper-Unterteil Nickel D16, D18, D20, D22, D24, T90
Handrad für Wilesco Dampfmaschinen D16, D18, D20, D21, D24, D161, D165, D202, D222, D242, D430, T125
Dampfabsperrventil/Ablassventil mit Ventilkörper-Unterteil und Bundmutter/Lötring Nickel D16, D18, D20, D24, T90
Dampfabsperrventil-Unterteil/Ventilkörper-Unterteil Nickel D16, D18, D20, D24, T90
(1 Beutel = 5 Stück)Länge ca. 130 mm
Madenschrauben für Schnurlaufrollen(1 Beutel = 10 Stück) für D12, D14, D141, D15, D16, D161, D20, D21, D22, D24, D52, D305, D365, D395, D366, D396, D398, D405, D495, D406, D496, D409, D499, D430
Double-grooved pulley made of nickel with a diameter of 25 mm, suitable for the following drive models: M55 and M56, as well as the stationary steam engines: D12, D14, D141, D16, D18, D20, D22, D24, and D455. This high-quality pulley ensures smooth operation and efficient power transmission in your steam engines and drive models. With precise manufacturing and durable quality, it is ideal for repairs or replacement in your models.
Replacement Boiler for WILESCO D18, D20, D22, D202 and D222 Upgrade your WILESCO D18, D20, D22, D202 and D222 with this premium replacement boiler. Featuring a spring-loaded safety valve, sight glass and retaining clamp, this boiler ensures reliable steam supply and long-lasting durability for your machines. Enjoy smooth operation and maximum safety – genuine WILESCO quality Made in Germany. Fits WILESCO D18, D20, D22, D202 and D222 Includes safety valve, glass, and retaining clamp Durable construction – made from high-quality materials Genuine WILESCO spare part – Made in Germany
Ersatz Schwungrad mit 100 mm Durchmesser und Achse in rot/nickel für die stationären Dampfmaschinen D20, D24.
Slide valve connecting rod D16, D18, D20, D21, D24
This 13mm diameter piston is specifically designed for steam engines such as D16, D161, D18, D20, D21, and D24. Crafted from high-quality materials, it ensures smooth performance and durability for your machines. Experience optimal performance of your steam engine with this replacement part.
This replacement piston connecting rod with screw is designed for the stationary steam engines D16, D161, D20, and D24. Crafted from high-quality materials, it ensures smooth performance and durability of your machines. Experience reliable functionality and optimal performance of your steam engines with this replacement part.
Schieberpleuelstange mit Schraube für die stationären Dampfmaschienen: D16, D161, D20, D24
Ersatz Kurbelscheibe mit Bolzenschraube für die stationären Dampfmaschinen D16 (bis 2001 und ab 2006), D20, D24.
Steam Pipe D20: The steam pipe D20 is an essential spare part for steam engines, ensuring smooth and efficient steam delivery. Specifically designed for the steam engine D20, this high-quality steam pipe offers optimal durability and reliability. With precise fit and easy installation, it's the perfect solution for repairs or enhancing your machine's performance. Experience the power of steam with the steam pipe D20.
Complete accessories bag for the stationary steam engine D20. Contents: Chimney Pressure gauge Funnel Steam whistle with chain hoist Burner slide Seals
Handrail support for models D18, D161 (from 2019), D20, D22, D24, D455, and T90, nickel-plated, with nut. This nickel-plated handrail support is specifically designed for the mentioned steam engines and provides a secure mounting for handrails and similar structures. Equipped with a nut for easy installation, it ensures stability and reliability. Made of high-quality material and featuring a robust design, this handrail support is an ideal addition to your steam engine.
Large eccentric disk for steam engines D16, D161, D18, D20, D21, D24, D202, and D242. This high-quality eccentric disk is specifically designed for efficient power transmission in your steam engines. With its robust design and precise manufacturing, it ensures smooth operation and high performance. Whether for repairs or as a spare part, this eccentric disk is a reliable choice for your steam engines.
Water drain valve with valve body base, outflow pipe, collar nut / solder ring, brass D21, D430